Pressure Pro skid mounted cold pressure washer with electric key start 4 GPM 3500 psi.

4 GPM 3500 psi Honda GX390 13 HP General Pump TS1511 v-belt on the new standard powder coated steel frame, marine battery box, 50 mesh inlet filter, commercial unloader, low oil shutdown, thermal relief valve, gun/wand assembly with quick connects, 50' high pressure grey hose with quick connects, 5 quick connect nozzles, 20% high draw chemical injector assembly with quick connects.

 Must inspect belts after 30 days. No warranty on belts. Unloader settings, clogged nozzles and loose belts are some causes of belt failure.

We highly recommend adding the best high pressure 3/8" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a Whisper Wash Ultra 16" surface cleaner.

If supplying with a garden hose from a property, use a 3/4" ID garden hose. if supplying water from a tank, use 1" non-collapsible suction hose with a 1" y-strainer (YS16H). We have a 4 GPM plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank.

Install a high temperature Hudson float valve (Hudson-HT) using everything you need to install it with our Hudson assembly (Hudson-A). The Hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing.  

Can not be shipped inside the state of California 

DIMS  34.5 X 22 X 20

 SKU: PW.S/EB4035HG-E